When non-transparent TCP tunneling is used, the application to be tunneled is set to connect to the local listener port instead of connecting to the server directly. SSH Tectia Client forwards the connection securely to the remote server.
If you have three hosts, for example,
imapserver, and you forward the traffic coming to the
143 to the
143, only the connection between the
sshserver will be secured. The command you use would be similar to the following one:
sshclient$ sshg3 -L 143:imapserver:143 username@sshserver
Figure 7.8 shows an example where the Secure Shell server resides in the DMZ network. Connection is encrypted from the Secure Shell client to the Secure Shell server and continues unencrypted in the corporate network to the IMAP server.
Tunnels can also be defined for connection profiles in the Connection Broker configuration file. The defined tunnels are opened automatically when a connection with the profile is made. The following is an example from a
<profile id="id1" host="sshserver.example.com"> ... <tunnels> <local-tunnel type="tcp" listen-port="143" dst-host="imap.example.com" dst-port="143" allow-relay="no" /> ... </tunnels> </profile>
By default, local tunnels originating only from the client host itself are allowed. To allow also other machines to connect to the tunnel listener port, set the
The tunneling settings can be made in the SSH Tectia Configuration GUI, under Connection Profiles → Tunneling per each profile. See Defining Tunneling.
Automatic tunnels are one way of creating non-transparent local tunnels for application connections.
Automatic tunnels always use a connection profile in the tunnel establishing. You can create listeners for local tunnels that will be activated automatically when the Connection Broker starts up. The actual tunnel will be formed the first time a connection is made to the listener port. If the connection to the server is not open at that time, it will be opened automatically as well.
In the Connection Broker configuration file, make the following kind of settings:
<static-tunnels> <tunnel type="tcp" listen-port="9874" dst-host="st.example.com" dst-port="9111" allow-relay = "no" profile="id1" /> </static-tunnels>
You can configure the automatic tunnels in the SSH Tectia Configuration GUI, on the Automatic Tunnels page. For instructions, see Defining Automatic Tunnels.
When sshg3 is used to create secure tunnels using local port forwarding, the TCP applications to be tunneled are configured to connect to a localhost port instead of the application server port.
clientapp1, by default connects to a Unix server
unix.example.com using TCP port 2345.
$ clientapp1 --username user1 --server unix.example.com --port 2345
For securing this TCP application using Secure Shell, use the following commands:
$ sshg3 -L 2345:localhost:2345 firstname.lastname@example.org -S -f & $ clientapp1 --username user1 --server localhost --port 2345
The above sshg3 command connects to remote Secure Shell server
unix.example.com, creates a local listener on port 2345, instructs the remote Secure Shell server to forward the incoming traffic to
localhost:2345, and goes to background in single-shot-mode.