Your browser does not support HTML5 local storage or you have disabled it. Some functionality on this site, including saving your privacy settings and offering you special discounts, uses local storage and may not work with local storage disabled. We recommend allowing the use of local storage in your browser. In some browsers, it is the same setting used for disabling cookies.
Gathering Basic Troubleshooting Information
Most connection problems can be solved by running sshg3 in verbose mode and examining the output.
Enter the command -v (or --verbose) to get the diagnostic output:
$ sshg3 -v email@example.com
You can also get the diagnostic output from the old connection attempts afterwards. The following command lists the old connection attempts and their connection IDs:
$ ssh-broker-ctl list-connections --disconnected
The following command shows the diagnostic output from the old connection attempts:
On Windows, the Tectia - SSH Terminal provides error dialog messages for failed connection attempts. Moreover, you can get the connection information and the last 5 messages displayed by the Tectia Client by opening the Tectia - SSH Terminal and selecting Help → Troubleshooting.... A window like the one shown in Figure 7.1 is then opened.
Figure 7.1. Window containing troubleshooting data
Copyright 2017 SSH Communications Security Corporation This software is protected by international copyright laws. All rights reserved. Contact Information