Your browser does not support HTML5 local storage or you have disabled it. Some functionality on this site, including saving your privacy settings and offering you special discounts, uses local storage and may not work with local storage disabled. We recommend allowing the use of local storage in your browser. In some browsers, it is the same setting used for disabling cookies.
Setting the Debug Level
Setting the Debug Level in the Console
When sshd2 is run as a started task, the debug level of the running server can be set using the z/OS console modify command debug.
To set the debug level of the running server, issue the following command (where debuglevel is a number from 1 to 99 indicating the level of diagnostics information required) from the z/OS console:
===> F SSHD2,DEBUG debuglevel
For example, to set debug level 4 (which is in most cases sufficient):
===> F SSHD2,DEBUG 4
To disable server debug, set debug level to 0 as follows:
===> F SSHD2,DEBUG 0
Setting the Debug Level in ISPF
To set the debug level of the server in ISPF, enter the Tectia SSH Assistant option 4.1.6 TSRVTR (Turn trace on or off in the running SSH server).
The trace level is a number which directs the server to produce diagnostic trace information on restart. Enter a trace level number in the Options field provided.
Trace level 2 provides user-oriented messages.
To disable server debug, set trace level number to 0.
Figure 10.1. Tectia SSH Assistant ISPF application - Turn trace on or off in the running SSH server (4.1.6 TSRVTR)
Copyright 2015 SSH Communications Security Corporation This software is protected by international copyright laws. All rights reserved. Contact Information