Your browser does not support HTML5 local storage or you have disabled it. Some functionality on this site, including saving your privacy settings and offering you special discounts, uses local storage and may not work with local storage disabled. We recommend allowing the use of local storage in your browser. In some browsers, it is the same setting used for disabling cookies.

Tectia

Encryption and Authentication Methods

To increase file transfer speed, the CryptiCore algorithm should be enabled on the server (if available). To allow non-interactive authentication, public keys can be used.

Enabling CryptiCore

The CryptiCore algorithm is supported on x86-based processor architectures. It allows increased file transfer speeds for large file transfers.

To use CryptiCore, include the following in the ssh-server-config.xml file:

<connections>
  <connection action="allow" tcp-keepalive="no">
    <rekey seconds="3600" bytes="1000000000" />
    <cipher name="crypticore128@ssh.com" />
    <mac name="crypticore-mac@ssh.com" />
  </connection>
</connections>

Using the Tectia Server Configuration GUI, this can be set under the Connections and Encryption page, on the Parameters tab. See Parameters.

Enabling Public-Key Authentication

To enable public-key authentication on the server, include the following in the ssh-server-config.xml file:

<authentication-methods login-grace-time="600">
  <banner-message />
  <auth-file-modes strict="yes" mask-bits="022" />
  <authentication>
    <auth-publickey />
  </authentication>
</authentication-methods>

The auth-file-modes element should be set to strict. This specifies that Tectia Server on Unix checks the permissions and ownership of the user's key files used for public-key authentication.

Using the Tectia Server Configuration GUI, the same settings can be made under the Authentication page, on the Parameters tab. See Parameters.

Note however, that the auth-file-modes option is not available on Windows, because strict host key checking is always used on Windows.

===AUTO_SCHEMA_MARKUP===