Your browser does not support HTML5 local storage or you have disabled it. Some functionality on this site, including saving your privacy settings and offering you special discounts, uses local storage and may not work with local storage disabled. We recommend allowing the use of local storage in your browser. In some browsers, it is the same setting used for disabling cookies.

SSH Tectia

Restricting Connections

SSH Tectia Server can be configured to reject connection attempts from unknown hosts. For example the following allows connections only from the internal network 10.1.0.0/8 IP addresses and from an external host with the IP address 195.20.116.1:

<connections>
  <connection action="allow">
    <selector>
      <ip address="10.1.0.0/8" />
      <ip address="195.20.116.1" />
    </selector>
  </connection>
  <connection action="deny" />
</connections>

Using the SSH Tectia Server Configuration GUI on Windows, the same settings can be made under the Connections and Encryption page, on the Selectors tab. See Editing Connection Rules.

Please see the section called “Selectors” for information on the selectors.

On systems with several network interfaces, SSH Tectia Server can also be bound to a specific network interface so that the server can be only accessed from the intended network. For example, the following will bind the listener to address 10.1.60.25 using the Secure Shell default port 22:

<params>
  <listener id="intranet" address="10.1.60.25" />
  ...
</params>

Using the SSH Tectia Server Configuration GUI on Windows, this can be set on the Network page. See Network.

===AUTO_SCHEMA_MARKUP===