If a host key is not found in the user-specific host key directory, it is next searched on Unix from the
/etc/ssh2/hostkeys directory, on pre-Vista Windows from the
C:\Documents and Settings\All Users\Application Data\SSH\HostKeys directory, and on Windows Vista and later Windows versions from the
C:\ProgramData\SSH\HostKeys directory. Host key files are not automatically put in the system-wide directory but they have to be updated manually by the system administrator (
The process for distributing the host keys manually is explained in the following. The instructions reflect the Unix file paths but are applicable also to Windows. Simply replace the Unix paths with the corresponding Windows paths.
To obtain and store hashed remote host keys in the system-wide storage:
Select a client-side user whose
$HOME/.ssh2/hostkeyswill be the basis for the system-wide
/etc/ssh2/hostkeys. The user should have administrative privileges, as placing the keys to the system-wide location requires them.
The same user account must also be used to maintain the system-wide
/etc/ssh2/hostkeyslater on if the host key on some server changes. The process is to maintain the user's host keys in the
$HOME/.ssh2/hostkeysdirectory and then replicate the changes to the system-wide
Make sure that the
$HOME/.ssh2/hostkeysdirectory is empty when obtaining the keys for the first time, or that the saved host keys are intentional.
If you need to obtain new keys later, the same
$HOME/.ssh2/hostkeys/saltfile has to be used.
Connect with Tectia ConnectSecure to the remote server, verify the fingerprint, and save the key.
Repeat this step as many times as there are remote servers. Note that you do not have to complete the user authentication, only the key exchange part of the Secure Shell connection.
Once you have obtained all the host keys you wish to maintain in the system-wide location, place the keys to the system-wide location, for example by running the following commands:
# mkdir /etc/ssh2/hostkeys # cp -p $HOME/.ssh2/hostkeys/* /etc/ssh2/hostkeys
Note that also the salt file (
$HOME/.ssh2/hostkeys/salt) has to be copied so that Tectia ConnectSecure is able to identify the hashed host keys. Also if multiple users contribute to the system-wide
/etc/ssh2/hostkeysdirectory, they have to share the same
After creating the system-wide location for host keys, you can maintain it by using the ssh-keygen-g3 tool.
The following copy examples show the most frequently needed commands for host key storage maintenance. The commands use the user-specific hostkey storages (
$HOME/.ssh2/hostkeys and possibly the
$HOME/.ssh/known_hosts file) as the source. If keys are to be copied from a different source, you need to append an appropriate
--hostkey-file option to the command.
To copy the key of a new host called 'alpha' from the user-specific hostkey storage to the system-wide directory, enter command:
# ssh-keygen-g3 --append=no --overwrite=no \ --copy-host-id alpha /etc/ssh2/hostkeys
In this case, because of
--overwrite=no, if a key for server 'alpha' already exists, the command will fail and the key will not be updated.
To add additional keys to a known host, enter command:
# ssh-keygen-g3 --append=yes --copy-host-id alpha /etc/ssh2/hostkeys
To update the key of a known host, enter command:
# ssh-keygen-g3 --append=no --copy-host-id alpha /etc/ssh2/hostkeys
To remove a host from the known hosts list, enter command:
# ssh-keygen-g3 --hostkeys-directory /etc/ssh2/hostkeys \ --delete-host-id alpha
For more detailed information on the ssh-keygen-g3 tool, see ssh-keygen-g3(1).
To obtain and store traditional remote host keys in the system-wide storage:
As a server-side user, copy the
/etc/ssh2/hostkey.pubfile from the server as
/etc/ssh2/hostkeys/directory on the client.
You can do this as a non-privileged user on the server but you must be a privileged user, for example
root, on the client.
Use secure means to transfer the file or verify that the fingerprint matches after the transfer with the ssh-keygen-g3 option
--fingerprint), for example on Tectia Server on Unix:
$ ssh-keygen-g3 -F /etc/ssh2/hostkey.pub
On the client:
# ssh-keygen-g3 -F /etc/ssh2/hostkeys/key_<port>_<hostname>.pub
Note that the identification is different based on the host and port the client is connecting to. Also connection with IP is considered a different host as well as connection to same host but different port. You can copy the same traditional
key_<port>_<hostname>.pubto all these different names.