Connection Failure
This error indicates that SSH Secure Shell for Workstations cannot establish a connection
to the remote host computer. There are several reasons that might cause this
situation.
It may be that you have simply made a typing mistake,
and there is an error in the name of the remote host computer. In this
case you should also receive an error stating that the host is unknown.
Check that you have defined the correct port number for the
connection. The port can be changed on the Connection page of
the Settings dialog.
There may be problems with the configuration or physical setup of the
network connection. Verify that other network connections are
functioning.
This problem may also arise if your local system is protected by a
firewall and the firewall has not been properly configured.
If you suspect that this is the case, ask your local system
administrator to reconfigure the firewall.
There may also be a temporary problem with the remote host
computer. If this is the case, you should wait for a while and try
to connect again later. Contact the administrator of the remote host
computer for additional information.
